Raw Materials
The Nexiform product is made from 'clean' waste and recycled aggregates. These materials normally go into landfill sites as they are considered a waste by- product of the quarrying industry. The careful grading of these materials allows it to be bound together to form such large slabs.

Process
The raw materials are mixed with an extremely clever binder. The resultant mix is then pressed into a slab. A decorated layer is then applied which is subsequently protected by the glossy topcoat.

Size
Our Kitchen Hob Panel Splashbacks vary between 10 - 15mm thick. The full range of sizes are as follows:

600
900
1000
900
1000

x
x
x
x
x

750
750
750
900
1000

mm
mm
mm
mm
mm

All sizes are designed to fit into existing Hob areas with no cutting.



Installation
The slabs are very simple to install. No preparation to the back of the slab. Ensure the wall to be fixed to is clean and dust free, and any loose plasterwork has been fixed. Do not use normal tile adhesive, we recommend our own specially formulated adhesive. This adhesive as been designed to work with this product, its clean, fast, and simple to use. See separate downloadable fixing instructions for details on 'How to fix Nexiform'. Finally, after the slab as been fixed (normally left overnight) use silicone around the edge, for that perfect finish.

Installation Instructions

Maintenance
Take care not to use any abrasive materials when cleaning your Nexiform panel. Although it's an extremely hard surface some scouring materials can damage the surface. Clean using an appropriate liquid cleaner, using a damp cloth and polish dry. Always read the instructions on the manufacture's packaging.